Download Print this page

Advertisement

Quick Links

866.332.2403 (TOLL FREE) (707) 640.29.05 (Option 4) Direct Line for the
Design Department; 7am – 7pm Pacific Time, Monday-Saturday
ASSEMBLY INSTRUCTIONS FOR THE
SEBASTOPOL PERGOLAS
P| 0
SEBASTOPOL PERGOLAS
www.ForeverRedwood.com

Advertisement

loading
Need help?

Need help?

Do you have a question about the SEBASTOPOL and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Forever Redwood SEBASTOPOL

  • Page 1 866.332.2403 (TOLL FREE) (707) 640.29.05 (Option 4) Direct Line for the Design Department; 7am – 7pm Pacific Time, Monday-Saturday ASSEMBLY INSTRUCTIONS FOR THE SEBASTOPOL PERGOLAS P| 0 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 2 Insert the carriage bolts into the holes and lightly tap with a hammer until the square neck fit in the wood piece and the bolt head must flush with the wood piece. Finally, place the washer and the nut and carefully tighten it using a ratchet with the necessary socket or a wrench. P| 1 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 3 Place the washers in their lag bolts. After that, insert the lag bolts into the holes and carefully tighten it using a ratchet with the necessary socket. Use the washers only for the Wood Pieces. To install the deck screws. Insert the deck screws into the holes and carefully tighten it using a drill. P| 2 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 4 P| 3 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 5 P| 4 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 6 P| 5 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 7 Step 2: Attach the single supports (2) to the posts with 3/8´´ X 11´´ bolts (B). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3/8´´ X 11´´ Bolts P| 6 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 8 Step 4: Attach the single supports (2) to the supports with in-between blocking (3), use 3/8´´ X 11´´ bolts (B). The quantity of bolts depends on the length of the supports. 3/8´´ X 11´´ Bolts P| 7 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 9 Step 6: Attach the main knee braces (5) to the posts with 3/8´´ x 10´´ bolts (E) and to the supports with 3/8´´ x 11´´ bolts (B). Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3/8´´ X 11´´ Bolts 3/8´´ X 10´´ Bolts P| 8 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 10 Step 8: Use 8´´ x 3´´ deck screws (D) to attach the central arched rafters (7) to the supports. Each part has a series of numbers that indicate where to attach the part with the corresponding number. 3´´ Deck screws P| 9 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 11 3´´ Deck screws Step 10: Finally, attach the boots (10) to the posts with 8´´ x 3´´ deck screws (D). 3´´ Deck Screws P| 10 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...
  • Page 12 This completes the Pergola assembly. Hope you enjoy your set for many decades. If you ever have a problem or a question, don't hesitate to call us (866 332 2403) or email us. We are here to support you. P| 11 SEBASTOPOL PERGOLAS www.ForeverRedwood.com...