Commissioning; Initial Operation; Return To Service - Vision tools MDL450 Technical Manua

5

Commissioning

5.1

Initial operation

Specifically, the following points should be noted:

The specified operating voltage of the MDL (The operating voltage can be found in
chapter Technical Data)

The MDL glows continuously because the slider is in the delivery status is at the second
position. (see Settings)
5.2

Return to service

Specifically, the following points should be noted:

The setting of the slide switch (see Settings)

If necessary, the surface of the MDL should be cleaned with a dry cloth to eliminate dust
and other dirt.
Technical Manual
Version 1.5
Commissioning
8