Table of Contents
Advertisement
82C89-O_AdvancedFeaturesText Page 10 Friday, January 3, 1997 9:06 AM
Advanced Features
EMERGENCY GROUP CALL
Placing an Emergency Group Call
An Emergency Group Call allows a user to have priority access to
his talkgroup members and provide them visual and audible indi-
cations of an emergency condition. The Emergency call can be
placed from any mode (private, group, phone).
1. Press and hold the Emergency Button. The mobile will emit
an emergency start tone to indicate that you have successfully
requested an emergency call.
2. Press the PTT to talk. The currently
selected Talkgroup Mode will be selected
unless your organization preprogrammed
an emergency Talkgroup Mode. If this is
the case, the preprogrammed emergency
Talkgroup Mode will flash in the display.
The Talkgroup Mode appears in the sec-
ond line of the display as shown.
3. To end an emergency call, press and hold the Emergency But-
ton for 3 seconds. The mobile will return to the last selected talk-
group. The initiator cannot exit the emergency call without first
cancelling the emergency call.
Cancelling an Emergency Group Call
Press the Emergency Button until the unit generates an Emer-
gency Call Cancel tone. This tone indicates the cancellation has
occurred. The display will return to the non-emergency state.
An emergency call will be cancelled if no talkgroup activity
occurs for 30 seconds. The dispatcher, or any other person provi-
sioned to cancel an emergency call, can also cancel the emer-
gency call.
Receiving an Emergency Group Call
When an emergency call is initiated, other members of the talk-
group will be notified of an emergency condition.
m 470
10
USER'S GUIDE
Advertisement
Table of Contents
