Motorola Krave User Manual page 87

0000), then touch Done and touch OK. The other
device might ask you to enter the same passkey.
Note: See the instructions that came with your
device for the device PIN code and other
information about the device.
7 Touch Yes to confirm the connection.
When the connection is made, your phone shows the
the Bluetooth connection active status indicator
Tip: When your phone's Bluetooth power is on, it
shows the Bluetooth power on status indicator
it can automatically connect to a handsfree device you
have used before. Just turn on the device or move it
near the phone.
reconnect a device
Note: Make sure the other device has Bluetooth
power on. Your phone can connect with only one
Bluetooth device at a time.
1 With the flip open, touch Menu
menu.
2 Touch Bluetooth
3 Touch DeviceList/NewDevice to show the devices your
phone has connected before.
4 Touch Connect next to the device name.
Note: Your phone will prompt you to turn on its
I
.
Bluetooth power if it is off.
5 If prompted, enter the passkey (usually set to
O
and
0000).
If the connection fails, try using Add New Device to find
and add the device as if it is new.
reconnect a handsfree device
during a call
During a call, you can connect a handsfree device if the
device is on and your phone has used it before.
to open the
.
connections 85