Activating Service; Powering On And Off - Motorola iDEN i870 User Manual

Iden digital multi-service data-capable phone
Hide thumbs Also See for iDEN i870:
Table of Contents

Advertisement

• Lithium Ion batteries have a self discharge rate
and without use, lose about 1% of their charge
per day.
• The battery capacity is degraded if the battery is
stored for long periods while fully charged. If
long term storage is required, store at half
capacity.

Activating Service

The first time you power on your phone, you must
be in your local calling area. This activates your
service.

Powering On and Off

The first time you power your phone on, a screen
may appear asking you to update your browser
information. This means you must enable security.
To power your phone on:
1 Open the flip.
Tip: Press the flip open button to open the flip
easily.
2 Press p.
Note: When powering on, if you press p for
more than 5 seconds, you will turn off
calls and other transmissions. See
"Temporarily Turning Off Transmissions"
on page 162.
To power your phone off:
1 Open the flip.
2 Press and hold p.
When You Power On For the First
Time
If the Enter SIM PIN Code screen appears, enter
your SIM PIN. See "Entering the PIN" on page 14.
Press A under Ok.
When you receive your phone, the SIM PIN is
0000. Change your PIN to prevent fraudulent use
of the SIM card (see "Changing the PIN" on page
14).
Activating Service
7

Advertisement

Table of Contents
loading

Table of Contents