Assigning A Ring Tone Or Picture - Motorola iDEN i870 User Manual

Contacts
3 If you want to assign a ring tone or picture to the
entry, select [Ring Tone/Picture]. See

"Assigning a Ring Tone or Picture".

4 To assign a Contacts type to the number or
address being stored:
Select the Contacts type field.
Select the Contacts type you want to assign.
Note: For information about creating SDG lists,
see "Creating SDG Lists in Contacts" on
page 62.
5 To store a number or address:
Select the # field (or ID for an email address, or
IP for an IP address).
Enter the number or address. For phone
numbers, use the 10-digit format. For email
addresses, see "Entering Text" on page 72.
Tip: Press A under Browse to select a number
or address from Contacts, the recent calls
list, or Memo.
When you are finished, press O.
6 If you want to change the default Speed Dial
number or a create a voice name for the entry,
select [Options]. See "Assigning a Speed Dial
Number or Voice Name" on page 41.
40
7 If you want to add more numbers or addresses
to the entry:
Scroll past the information you already entered.
Enter the additional information for the entry
using step 3 through step 6. You must assign a
name to the entry, if you have not already.
8 Press A under Save.
Assigning a Ring Tone or Picture
Note: If you choose a picture or ring tone that is
stored on the memory card, that picture or
ring tone file is automatically moved to
your phone's memory.
1 If you have not already, select [Ring
Tone/Picture].
2 If you want to assign a ring tone:
With Ringer highlighted, scroll left or right to
choose a ring tone from the list of standard ring
tones. -or-
Select Ringer. Select the ring tone you want to
assign from the ring tones in available in the
media center. If you want to assign a ring tone
from the memory card, that ring tone must be a
DRM item.
3 If you want to assign a picture from the media
center: