Disconnection Of A Tractor - Uniforest SCORPION 1300 Instructions For Use Manual

To loader
The procedure is identical as for any other tool for loader, only here you have to connect
tongs for logs. Between the tractor and tongs for logs no persons, animals or object are
allowed. The tractor must be shut down, when the driver connects the hydraulics.
Connect hydraulic line to tongs for logs according to hydraulic version of tongs. Move
support leg 2 in transport position (figure 2).
Pliers for timber after the finished work always put down in a closed condition.

8.2. Disconnection of a tractor

From tractor hydraulic lift
Move support leg 3 in support position (figure 1). Pliers for timber before disconnecting
them from the tractor, always put down on a flat and solid ground in the closed
condition. First check, whether the pliers are secured against the movement with bolt 2
(Figure 2). Disconnect the hydraulic hoses, place protection on the quick thimbles and
insert them into the place on connection. In the case of the steering console, insert her on
a supposed place on a connection. Upper control lever loosen and disconnect. Lower
tractor arms disconnect.
From loader
Move support leg 3 in support position (figure 1). Put tongs for logs on flat, solid ground,
when they are closed. Check beforehand that the tongs are secured against movement
with bolt 2 (figure 1).
Disconnect hydraulic lines, set protections for quick clamps and put them on the storage
place on the connection. Disconnect from the loader.
8