Page 5
Tonda GT Chronograph (steel) PF043 WINDING Your watch automatically self-winds when you wear it. To become fully wound, it must be worn for at least 12 hours. This may vary depending on the type of user. If the watch is completely unwound, the crown will have to be turned approximately 15 times ;...
Page 6
mise à l’heure - TONDA GT CHRONOGRAPHE counterclockwise clockwise...
Tonda GT Chronograph (steel) PF043 SETTING THE TIME 1. Unscrew and pull the crown out two notches. 2. Turn the crown anti-clockwise to advance the hands until the date disc (calendar) jumps (it is then midnight). 3. Turn the crown a few minutes beyond the desired time, then return to the time to be set.
Tonda GT Chronograph (steel) PF043 SETTING THE DATE 1. Unscrew and pull the crown out one notch. 2. Turn the crown clockwise to scroll to the desired date. 3. Push the crown back to its initial position and screw it back in while pressing it against the case.
Page 11
Tonda GT Chronograph (steel) PF043 CHRONOGRAPH Description of the push-buttons A. Start and stop push-button B. Reset push-button 1. Pressing push-button A once starts the chronograph. 2. A second press on push-button A stops the chronograph. To resume timing, press button A again.