Page 5
Tonda Pf Annual Calendar PF339 WINDING Your watch is wound automatically when worn on your wrist. To obtain the full power reserve, the watch must be worn for at least twelve hours. This figure may vary depending on the type of user. Furthermore, if the watch’s power reserve is completely exhausted, you will need to turn the crown through approximately 15 rotations;...
Page 6
mise à l’heure - TONDA PF ANNUAL CALENDER mise à l’heure - TONDA PF ANNUAL CALENDER counterclockwise clockwise...
Tonda Pf Annual Calendar PF339 SETTING THE TIME 1. Unscrew the crown and pull it out two notches. 2. Turn the crown counterclockwise to move the hands forward, until the day hand and date hand jump (it will then be midnight).
Page 8
description des corrections - TONDA PF ANNUAL CALENDER description des corrections - TONDA PF ANNUAL CALENDER...
Page 9
Tonda Pf Annual Calendar PF339 DESCRIPTION OF CORRECTORS A. Month correction B. Moon phase correction C. Calendar correction (date, day and month) D. Day correction Note : only press the correctors using the correction tool provided with your watch...
Page 10
description des corrections - TONDA PF ANNUAL CALENDER description des corrections - TONDA PF ANNUAL CALENDER...
Page 11
Tonda Pf Annual Calendar PF339 SETTING THE ANNUAL CALENDAR 1. To enable the setting of the month, position the date indicator hand between 2 and 26 by pressing corrector C repeatedly. 2. Press corrector A repeatedly to move the month hand to the desired month.
Page 12
description des corrections - TONDA PF ANNUAL CALENDER description des corrections - TONDA PF ANNUAL CALENDER...
Page 13
Tonda Pf Annual Calendar PF339 SETTING AND CORRECTING MOON PHASES Press corrector B repeatedly to move the moon phase disc to the desired phase (refer to a lunar calendar). One press corresponds to one lunar day. Moon phases can be set and corrected at any time.