Creating Entries - Motorola iDEN i205 User Manual

3 Scroll to Show All.
4 Press A under Select.

Creating Entries

A number or address and a Contacts type are
required for all Contacts entries. Other information is
optional. You may enter the information in any order
by scrolling through the entry details.
After you have entered the number or address,
Contacts type, and any other information you want,
you can press A under Done to save the entry to
Contacts.
To cancel a Contacts entry at any time press, e to
return to the idle screen.
Tip: In some fields that require you to enter
information, you can begin entering the
information from the keypad instead of
pressing A under Change.
To create a Contacts entry:
1 To access the entry details screen:
Select Contacts > [New Contact]. -or-
From the Contacts list, press m. Scroll to New.
Press A under Select.
2 If you want to assign a name to the entry:
With the Name field highlighted, press A under
Change.
Enter the name. See "Entering Text" on page 75.
When you are finished, press A under Ok.
3 If you want to assign a ring tone to the name:
With the Ringer field highlighted, press A under
Change.
Scroll to the ring to you want to assign.
Press A under Ok.
4 To assign a Contacts type to the number or
address being stored:
With the Contacts type field highlighted, press A
under Change.
Scroll to the Contacts type you want to assign.
Press A under Select.
5 To store a number or address:
With the # (or ID for an email address, or IP an IP
address) field highlighted, press A under Change.
Enter the number or address. For phone numbers,
use the 10-digit format. For email addresses, see
"Entering Text" on page 75.
When you are finished, press A under Ok.
Creating Entries
27