Eden 391/7066 Assembly Instructions Manual

3+2 sideboard

Hide thumbs

page of 20

/ 20
Bookmarks

Quick Links

Download this manual

Eden - 3+2 Sideboard

Assembly Instructions -

Dimensions

Width - 119.5cm

Depth - 38.1cm

Height - 83.2cm

Important -

Please read these instructions fully before starting assembly

If you need help or have damaged or missing parts, please visit www.argos-support.co.uk

or email: Help@ClickSpares.co.uk (quoting your original order number)

Alternatively, call the Spares Helpline on: 0370 112 1928.

For any other queries please contact the Customer Helpline on: 0345 640 2020

Please keep for future reference

391/7066

414/4034

MADE IN

BRITAIN

Issue 1 - 21/07/15

Need help?

Do you have a question about the 391/7066 and is the answer not in the manual?

Questions and answers

Summary of Contents for Eden 391/7066

Page 1 Eden - 3+2 Sideboard Assembly Instructions - 391/7066 Please keep for future reference 414/4034 Dimensions Width - 119.5cm Depth - 38.1cm MADE IN Height - 83.2cm BRITAIN Important - Please read these instructions fully before starting assembly If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number)
Page 2 Safety and Care Advice Important - Please read these instructions fully before starting assembly • Warning: This unit weighs • Make sure you have enough • We do not approximately 42kgs. space to layout the parts before recommend the Please lift with care. starting.
Page 3 Components - Panels If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020 Please check you have all the panels listed below Left Side Right Side...
Page 4 Components - Fittings If you need help or have damaged or missing parts, please visit www.argos-support.co.uk or email: Help@ClickSpares.co.uk (quoting your original order number) Alternatively, call the Spares Helpline on: 0370 112 1928. For any other queries please contact the Customer Helpline on: 0345 640 2020 Please check you have all the fittings listed below Note: The quantities below are the correct amount to complete the assembly.
Page 5 Assembly Instructions Step 1 Prepare the 2 drawer fronts 2.5cm 0.7cm Screw 2 metal dowels into each of the drawer fronts Note: Tighten the metal dowels up fully against the panels. Step 2 Prepare 2 pairs of drawer sides Insert a small locking into the hole shown on the left drawer side...
Page 6 Assembly Instructions Step 4 Drawer Base Middle Drawer (T353-327) Base (T317-327) (35.3 x 32.7cm) Fit the drawer base (31.7 x 32.7cm) Slide the drawer base down the grooves in the drawer sides and down into the groove in the drawer front Step 5 Middle Drawer...
Page 7 Assembly Instructions Step 8 Prepare the middle drawer front Screw 2 metal dowels into the middle drawer front Note: Tighten the metal dowels up fully against the panels. Step 9 Prepare the drawer sides Insert a small locking into the hole shown on the left drawer side and the right...
Page 8 Assembly Instructions Step 11 Fit the middle drawer base Slide the middle drawer base down the grooves in the drawer sides down into the groove in the middle drawer front Step 12 Fit the drawer back Fit the middle drawer back between the drawer sides...
Page 9 Assembly Instructions Step 15 Prepare the horizontal divider Screw 2 metal dowels into the horizontal divider Insert 4 large locking nuts into the horizontal divider Note: The arrow on the locking nut must point Finished front edge towards the hole in the edge of the panel.
Page 10 Assembly Instructions Step 17 Fit the bottom divider to the horizontal divider Push the bottom divider onto the horizontal divider Use a screwdriver to tighten the 2 large locking nuts fitted to Finished Finished the bottom divider front edge front edge Note: Turn the large locking nuts as far as...
Page 11 Assembly Instructions Step 19 Prepare the 2 top dividers Place a runner each top divider shown. Slide back the top of runner and use the 2nd hole from the front Finished to fit the 1st screw front edge Slide the runner back the other way and fit the 2nd screw into...
Page 12 Assembly Instructions Step 20 Fit the 2 top dividers Attach the 2 top dividers to the horizontal divider using 4 screws Finished front edge Step 21 Fit the base Push the base onto the bottom divider Use a screwdriver to tighten the 2 large locking nuts fitted to...
Page 13 Assembly Instructions Step 23 Fit the top Push the top onto the 2 top dividers Use a screwdriver to tighten the 4 large locking nuts fitted to the 2 top dividers Finished front edge Step 24 Prepare the left side Place a runner Finished the left side...
Page 14 Assembly Instructions Step 25 Prepare the right side Place a runner the right side shown. Slide back the top of runner and use the 2nd hole from the front to fit the 1st screw Slide the runner back the other way and Finished fit the 2nd screw into...
Page 15 Assembly Instructions Step 26 Fit the base to the right end Push the right side onto the assembly. The small metal dowels fitted to the right side and top must slide into the top of the 4 hollow core locking nuts fitted to the right side and base .
Page 16 Assembly Instructions Step 28 The measurement from top corner X to bottom corner X must be equal to the measurement from top corner Y to bottom corner Y Fit the back Square up the unit by making sure that measurement x to x equals y to y.
Page 17 Assembly Instructions Step 30 Fit the shelves Insert 4 shelf studs each shelf Lower the shelves down onto the shelf studs Step 31 Prepare the 2 doors Push fit 2 hinges into each of the 2 doors Secure each hinge with 2 screws Note: Before securing with the screws, make...
Page 18 Assembly Instructions Step 32 Fit doors and handles Note: The easiest way to attach each door is to fit the top hinge first, then align and fit the bottom hinge. Push the hinge onto the front part of the hinge plate Keep the hinge FLAT against the hinge plate...
Page 19 Assembly Instructions Step 33 Adjust the doors if needed Before adjusting the doors, use a spirit level to check the base (or top) of the unit is level, front-to-back and side-to-side in the 3 positions shown. Use suitable packing pieces (not supplied) to make the unit level BEFORE making any adjustment to the hinges,...
Page 20 Assembly Instructions Step 34 Example Attach the Attach the Fit the overbalance Screw strap to the wall strap to the unit protector kit Washer Wall fixing Strap To prevent possible Strap (not supplied) overbalancing we Washer recommend that this unit is secured to a suitable Screw wall by fitting of the...

This manual is also suitable for: