D-Link DAP-3711 Quick Installation Manual page 6

3. Wrap the metal mounting ties around the
pole and thread them through the holes
on the DAP-3711.
Figure 10: Completed Installation
Once completed, your network will resemble
the following diagram.
Client mode
DAP-3711
PoE injector
Switch
PC1 PC2
Figure 11: DAP-3711 Network
RF Frequency Requirements
This device is for outdoor use only. High power
radars are allocated as primary users of the 5150
- 5250 MHz and 5725 - 5850 MHz bands. These
radar stations can cause interference with or
damage the PoE adapter of this device. This is a
fixed point-to-point device.
TECHNICAL SUPPORT
Quick Installation Guide
AP mode
DAP-3711
PoE injector
Switch
PC3 PC4
dlink.com/support
6