Deleting Cooking Stages; Modifying User Time Limits - Amana RC517 Series Owner's Manual

Deleting Cooking Stages

1. Open oven door. Display shows "door".
• If door is closed or RESET pad is pressed before
finishing programming sequence, oven exits
programming mode.
2. Press pad 1 for five seconds. After five seconds,
signal sounds. Display shows "P" and active menu.
3. Press desired number pad to be deleted.
4. DELETE pad twice. All cooking stages
P r ess
and power levels for this item are set to zero.
Display shows "P".
5. Press RESET pad or close oven door to exit
programming mode.
Summary of Deleting Cooking Stages
1. Open oven door.
2. Press pad 1 for five seconds.
3. Press desired menu pad.
4. Press desired number pad to be deleted.
5. Press DELETE pad twice.
6. Press RESET pad or close oven door.

Modifying User Time Limits

A user defined time can limit each set of programs
associated with each available menu pad. For example, if
user time limit for MENU 1 is 30 minutes, total cook time
of all available stages for a single number pad can not
exceed 30 minutes.
1. Complete steps 1-3 of Changing User Options.
2. Press desired menu pad to change. Display shows
active menu and present user time limit.
3. Press numbers to enter desired user time
limit. Display shows new user time limit.
4. Press corresponding menu pad again to save
user time limit. For example, if changing heating time
limit for MENU 1, press MENU 1 pad.
5. Press RESET pad or close oven door to exit
programming mode.
Summary of Modifying User Time Limits
1. Open oven door.
2. Press pad 1 for five seconds.
3. Press hidden enable pad.
4. Press desired menu pad to change.
5. Enter desired heating time limit.
6. Press corresponding menu pad.
7. Press RESET pad or close oven door.
11