Table of Contents
Advertisement
en Troubleshooting
Fault
Drying programme
does not start.
The laundry is too
damp.
50
Cause and troubleshooting
Door is not closed.
Close the door.
1.
Press
to start the programme.
2.
No drying programme is selected.
Select a suitable drying programme.
▶
→ "Programmes", Page 26
Unsuitable programme for the type of fabric.
There has been a power cut.
Check whether the lighting in your kitchen or other
▶
appliances are working.
The load is too large.
After the end of the programme, warm laundry feels
damper than it actually is.
Remove the laundry from the drum as soon as the
1.
drying programme has finished.
Spread the items of laundry for cooling.
2.
Unsuitable dryness level set.
Drying target not adjusted.
Load too small.
Moisture sensor dirty.
Water tap is closed during the drying phase.
Make sure that the water tap also remains open
▶
during the drying phase.
The ambient temperature is greater than 30 °C.
Ensure that the ambient temperature is lower than
▶
30 °C.
Insufficient air circulation at the appliance's installation
location.
Ventilate the appliance's installation location.
▶
The water pressure is low.
No remedial action possible.
Laundry is not spun sufficiently.
Always select the highest possible spin speed for
▶
the washing programme in question.
Thick and multi-layered fabrics require a longer drying
time.
Set a timed programme for the subsequent drying.
▶
→ "Programmes", Page 26
Advertisement
Table of Contents
