Operating The Eye Massager; Sound And Music Player; Modes - Adamson A80 User Manual

Operating the eye massager

During the first uses, we recommend setting the correct
program and then wearing the massager. Once you are
more familiar with the buttons and modes, you can wear
the massager first and then select your preferred mode.
1. Press and hold the button for 3 seconds to turn the
device on and off.
2. Once on, press the button to select the massage type:
dynamic, warm, cold and automatic.The corresponding
indicators light up depending on the selected mode.
3. Press the button to switch pressure levels: strong
(default), soft and off. Turning off the pressure feature is
not possible in Dynamic mode.
The default working time is 15 minutes, so the machine
turns off automatically after this time has elapsed. If you
want to use it for a longer period, turn on the eye massager
again. When using the cooling function, it is recommended
to let the device rest for 30 minutes between uses in order
to avoid damage to the fan.
Note: The fan may continue to rotate for one
minute after turning off the device.

SOUND AND MUSIC PLAYER

The eye massager has a built-in sound player with a relaxing
playlist of natural sounds. Press the
pause/resume music playback.
You may also connect your own Bluetooth device to play any
music or sounds you prefer. To do so:
1. Open the list of Bluetooth connections on your device and
select "Adamson A80". A beep will sound once the
connection has been established and a voice prompt
indicates the connection/disconnection of Bluetooth devices.
2. Press the button twice to pause/resume music playback.
Note: volume cannot be adjusted from the eye
massager. Adjust the volume directly in the
connected Bluetooth device.

MODES

Mode Features
Dynamic Pressure + music
Pressure + heat +
Warm
music
Pressure + cold +
Cold
music
Pressure + hot &
Automatic
cold + music
*
Pressure icon is off when pressure is switched off
4
button twice to
Icons Pressure
Always on
Selectable
*
Selectable
*
Selectable
*