Advertisement
6
Connecting the Fuel-Cooler
Hoses
Parts needed for this procedure:
2
Barb hose connector
2
Hose clamp (worm-type)
1
Fuel hose 6.4 x 457 mm (1/4 x 18 inches)
2
Hose clamp (spring-type)
1
Cable tie
Assembling the Fuel Cooler Hose
Fittings
1.
Assemble a barb hose connector into each of
the fuel-cooler hoses
Figure 13
1. Fuel-cooler hose
2. Hose clamp (worm-type)
2.
Secure the hose connector to each of the hoses
with the worm-type hose clamps
(Figure
13).
3. Barb hose connector
(Figure
13).
Connecting the Fuel Tank and Fuel
Cooler Hoses
1.
Remove the spring-type hose clamp and
fuel-tank hose at the rearmost fitting of the fuel
filter head
Note:
Retain the hose clamp.
1. Fitting—fuel filter head
(rearmost position)
2. Hose clamp (spring-type)
2.
Plug the end of the hose.
3.
While maintaining hose routing, place the fuel
tank hose next to the inboard fuel-cooler hose
(Figure
15).
Note:
Ensure that the fuel-tank hose routes
close to the left frame rail of the machine.
g356294
7
(Figure
14).
Figure 14
3. Fuel-tank hose
g356306
Advertisement
