Soundcore Liberty 2 Quick Start Guide

WEARING

Choose the EarTips and EarWings that fit your ears best.
Adjust the earbuds to ensure the microphone is directed towards your mouth.

CHARGING

Fully dry off the earbuds before charging.

POWERING ON/OFF

Open or close the charging case to power on/off.

PAIRING

Open the charging case and keep it open. Find "Soundcore Liberty 2" in Bluetooth list on your device. Confirm to pair when a notification pops up, otherwise the secondary earbud may not be used separately.

BUTTON CONTROLS

X1: Press once
X2: Press twice
1": Press and hold for 1 second
5": Press and hold for 5 seconds
All of the controls in stereo mode can be customized in the Soundcore App.

PAIRING WITH ANOTHER DEVICE

Place the earbuds into the charging case and keep it open. Press and hold the button on the case for 3 seconds until the LED indicator on the right earbud flashes white.

RESET

Reset if the earbuds cannot connect with each other properly or cannot connect with your device properly. Place the earbuds into the charging case and keep it open. Press and hold the button on the case for 10 seconds until the LED indicators on earbuds flash red 3 times.

APP

Download the Soundcore App for HearID, UI customization, EQ settings, and earbuds firmware update.
Make sure the earbuds firmware is always up-to-date before using.
Enable Bluetooth permission while using the App.


Google Play and the Google Play logo are trademarks of Google Inc.

Apple and the Apple logo are trademarks of Apple Inc.

LED LIGHT GUIDE

Steady white
Steady red
Flashing white
Flashing red

Customer Service

18-month limited warranty
Lifetime technical support
Our warranty is additional to the legal rights consumers have buying this product.

SUPPORT

For FAQs, detailed user manual and more information, please visit www.soundcore.com/support