• IP filter settings
Set the IP address for which the IP filter function will be used.
Double-click <Detailed Setting> of "IP Filter Settings."
Displayed items
Item
Access from IP address below
Range Setting
IP Address
IP Address Excluded from Range
7 PARAMETER SETTINGS
58
7.3 Setting Procedure
Description
Select whether to allow or deny the access from the specified IP addresses.
Select the checkbox when specifying the IP addresses by range.
Set the IP address to be allowed or denied.
When selecting the checkbox of "Range Setting", enter the start IP address (left field) and
end IP address (right field) of the range.
Set the IP address to be excluded from the set range when selecting the checkbox of
"Range Setting."
Up to 32 IP addresses can be set.
Setting range
• Allow
• Deny
• Blank
• 0.0.0.1 to
223.255.255.254
• Blank
• 0.0.0.1 to
223.255.255.254