Features; Assembly; Operation - Ryobi FVC51 Operator's Manual

PRODUCT SPECIFICATIONS
Rated Speed ...............................................270 /min (RPM)
WARNING:
Do not use this product if it is not completely assembled
or if any parts appear to be missing or damaged. Use of
a product that is not properly and completely assembled
or with damaged or missing parts could result in serious
personal injury.
If any parts are damaged or missing, please call 1-800-525-2579 for assistance.
WARNING:
Do not allow familiarity with this product to make you
careless. Remember that a careless fraction of a second
is sufficient to inflict serious injury.
WARNING:
Always remove battery pack from the tool when you are
assembling parts, making adjustments, changing acces-
sories, cleaning, or when not in use. Removing battery
pack will prevent accidental starting that could cause
serious personal injury.
WARNING:
Always wear eye protection with side shields marked to
comply with ANSI Z87.1. Breathing protection may also
be required depending on the type of attachment used
and as prescribed elsewhere in this Operator's Manual.
Failure to do so could result in objects being thrown into
your eyes and other possible serious injuries.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.

FEATURES

Cutting Capacity........................................................ 1/4 in.

ASSEMBLY

WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to
possible serious personal injury.

OPERATION

APPLICATIONS
You may use this product for the purposes listed below:
 Cutting cardboard, carpet, rubber, leathers, plastics, and
"clamshell" type product packaging, paper/vinyl and more
INSTALLING/REMOVING BATTERY PACK
See Figure 1, page 9.
To install:
 Unscrew and remove the battery cap.
 Insert the battery pack into the product as shown.
 Place the cap over the battery pack and push down until
the cap meets the threads at the end of the tool.
 Screw the cap on securely.
NOTE: Do not attempt to use this product if the battery
cap is not securely closed.
To remove:
 Unscrew and remove the battery cap.
 Remove the battery pack from the tool.
6 - English