Variance - Monroe Trader III User Manual

"How did this happen?", you ask. Well, the Setup List has up to five (5) preset
variables stored, one for each basys point level and yes, they are modifiable.
(Series 211 has only 1 stored variable)
You can also do a "Mark Down". Press the <change sign> then the <Mark up>.
This will reverse the direction of the calculation and give a set of mark downs
with 5 basys point levels.
See the section on <SETUP/SPCL FNCT> for more information on setting this
value.
See Page 7 for another example
PAGE 6
Second, try <1> <MARK UP> and the YIELD will adjust by 1 (one) basys point.