Technical Specifications/Approvals; Dimensions - Bindicator VRF-1000 Series Installation, Operation And Maintenance Manual

TECHNICAL SPECIFICATIONS/APPROVALS

ELECTRONICS
Line Voltage
Power Consumption
Output Relay
Temperature Range
Sensitivity Settings
Selectable Time Delay
PROBES
Standard Duty
Standard Kynar Coated
®
Food Grade
Stub
Heavy Duty
Heavy Duty Kynar Coated
®
Flush and Dome Flush
Armored Food Grade
Jumbo
Teflon Jacketed
®
Teflon Jacketed Heavy Duty
®
Fly Ash
APPROVALS
FM Approved

DIMENSIONS

See the Appendix for appropriate model drawings and applicable housing and probe dimensions.
AC Models 85VAC to 265VAC; DC Models 10VDC to 36VDC
5.5 watts maximum
2 form C (DPDT), 6A at 240VAC, 6A at 30VDC, minimum load
12V/100mA
-40° F to +158° F (-40° C to +70° C)
See Chapter 5
See Chapter 5
316 Stainless Steel and Ryton
-100° F to +450° F (-73° C to +232° C)
316 Stainless Steel and Ryton
-100° F to +250° F (-73° C to +121° C)
316 Stainless Steel and Polysulfone, 150 PSI (10.5kg/cm
-30° F to +300° F (-34° C to +149° C)
316 Stainless Steel and Polysulfone, 150 PSI (10.5kg/cm
-30° F to +300° F (-34° C to +149° C)
316 Stainless Steel and Ryton
-100° F to +450° F (-73° C to + 232° C)
316 Stainless Steel and Ryton
-100° F to +250° F (-73° C to +121° C)
316 Stainless Steel and Epoxy, 50 PSI (3.5kg/cm
-30° F to +200° F (-34° C to +93° C)
316 Stainless Steel and Food Grade Epoxy, 150 PSI (10.5kg/cm
-30° F to +230° F (-34° C to +110° C)
316 Stainless Steel and Epoxy, 50 PSI (3.5kg/cm
-30° F to +200° F (-34° C to +93° C)
316 Stainless Steel and FEP Teflon
-30° F to +250° F (-34° C to +121° C)
316 Stainless Steel and FEP Teflon
-30° F to +250° F (-34° C to +121° C)
316 Stainless Steel and Ryton
-100° F to +250° F (-73° C to +121° C)
Electrical measurement equipment for use in indoor/outdoor (NEMA 4X,
IP66) unclassified locations.
3
, 150 PSI (10.5kg/cm
® 2
coated with Kynar , 50 PSI (3.5kg/cm
® ®
, 150 PSI (10.5kg/cm
® 2
coated with Kynar , 50 PSI (3.5kg/cm
® ®
)
2
)
2
, 50 PSI (3.5kg/cm
®
, 50 PSI (3.5kg/cm
®
coated with Kynar , 50 PSI (3.5kg/cm
® ®
)
)
2
)
2
)
2
)
)
2
)
2
)
2
)
2
)
2