Preparation For Use - Coby CX-CD425 Operation Manual

Preparation for use

Carefully unpack the unit from its carton (do not attempt to connect anything
at this stage). You should have the following items:
Packing included
1. This User Guide.
2. Main Unit with built in AC plug.
3. Two Speakers Box.
4. Remote Control (batteries not included).
If any these items is missing, consult your dealer. Keep any packaging in case
you want to transport the Main unit at some later date.
Connections
* Connect the speakers to the speaker sockets on the back of the main unit.
* Connect the right speaker to the right socket and left speaker to the left socket.
Connect the left/right speaker lead wires to the speaker terminals. Pay attention
to the polarity. The polarity wires (Red wire or Black wire with White stripe)
should connect to the red colour (+) terminals. The Black wire should connect to
the black colour (-) terminals.
* Connect the AC Power cord to the AC outlet.
* Unwind the FM antenna.
AC Power Operation
* If you wish to power your Main unit from the mains, find a location that is close
to and within easy access of a mains socket. Do not stretch the cable - if you
cannot reach a supply you should find an alternative location for the system.
* Connect the AC power cord into a suitable outlet and switch on at the mains plug
if the socket has a switch.
Switching on Main Power
Your System cames fitted with a mains power cable and plug.
Plug into the mains socket and switch on. Ensure the voltage is compatible.
The Power Standby LED Indicator will On and LCD display the Timer.
Press the Power Button to turn on your system. The Power Standby LED Indicator
will Off and LCD become On and display the previously selected function.
When not in use, switch off and unplug your system from the mains power.
Adjusting the sound
To adjust the sound level turn the Volume control locatied on the right side of
your system.
- Press the VOLUME "Up" or "Down" to get a satisfactory sound level when
you select the desired program.
- Press the Mute button to muting the sound.
Using Headphones
Plug your headphones into the headphones socket located in the middle of your
system on the left hand side.
The sound will be hear through the headphones, not the speakers.
Please note :
Headphones should have a 3.5mm diameter stereo plug and an impedance
of 8-32 ohms.
4