Coby CX-CD425 Operation Manual page 13

Using the CD Player (Cont.)
Programmed track selection
You can set your Mini Tower System to play a selection of tracks from your disc.
To select specific tracks
Make sure there is no CD playing.
Press the MEMORY Button once . The LCD Display the desired number to program.
Press Skip/Search Forward or Backward to display the track number you want.
Press the MEMORY Button once to select the next track. The previous track is
now saved.
Repeat these steps until all the tracks you want are stored. You can select a
maximum of 20 tracks. You can select a track more than once.
Press the Play/Pause Button. The Program LED indicator light up.
The first programmed track of your selection starts playing.
After all the programmed tracks have been played, the CD player stops automatically.
To cancel your memorised program, press the Stop Button and open the CD door.
Please note
If during track selection, you press the Play/Pause Button before pressing the
PROG Button, the track will not be stored in the memory and the disc will start
playing from the first selected track.
Repeat disc play
You can set your CD player to repeat play a single track, the whole disc or your
programmed track selection.
To repeat a single track
Ensure that the track is first playing by pressing the Play/Pause Button.
Press the REPEAT Button twice. The "Repeat 1" LED indicator light up to
indicate 'track repeat' is on.
The selected track will play continuously until you press the Stop Button.
or press the REPEAT Button once more.
To repeat the whole disc
Ensure that the disc is first playing by pressing the Play/Pause Button.
Press the REPEAT Button once. The 'Repeat All' LED indicator light up to
indicate 'disc repeat' is on.
The entire disc will play continuously until you press the Stop Button.
or press the REPEAT Button twice more.
13