Installation Steps, Continued
Installation
STEP ONE
The ATG LMU Gateway should be mounted with
screws to the desired location near the ATG and
power. The box has holes for fastening to a wall or
other secure structure.
STEP TWO
Connect the female 9 pin port from the ATG cable to
the male 9 pin port from the serial adapter. Tighten
with Phillips screwdriver - do not over-tighten.
(**See Gateway Communication Adapter Setups later
in this document.)
Serial Adapter
PedigreeTechnologies.com | Support: (701)-499-0022
ATG Cable**
3
ATG Inventory Manager