Advertisement
Quick Links
INSTALLATION MANUAL
ATG Inventory Manager
Document ID: IM-IM-ATG
Last Updated: August 18, 2022
Pedigree Technologies recommends using a professional installer for optimal
results. Please let your Pedigree Technologies representative suggest a provider if
you need help with your hardware installations.
PedigreeTechnologies.com | Support: (701)-499-0022
Advertisement
Summary of Contents for Pedigree Technologies OneView ATG
- Page 1 ATG Inventory Manager Document ID: IM-IM-ATG Last Updated: August 18, 2022 Pedigree Technologies recommends using a professional installer for optimal results. Please let your Pedigree Technologies representative suggest a provider if you need help with your hardware installations. PedigreeTechnologies.com | Support: (701)-499-0022...
-
Page 2: Required Information
ATG Inventory Manager Prerequisites Required Information • Name of asset (ex: C-Store #20) • Detailed information about the asset (year, model, tank volumes, probe s/n w/compartment installed into, etc.) • State, area, organization, or group the asset belongs to (ex: North Region, MN tankers, etc.) •... -
Page 3: Installation
ATG Inventory Manager Installation Steps, Continued Installation STEP ONE The ATG LMU Gateway should be mounted with screws to the desired location near the ATG and power. The box has holes for fastening to a wall or other secure structure. STEP TWO Connect the female 9 pin port from the ATG cable to the male 9 pin port from the serial adapter. - Page 4 ATG Inventory Manager Installation continued STEP THREE Insert the 5 pin plug of the serial adapter into the Aux 2 port on the ATG LMU Gateway. Serial Adapter STEP FOUR Insert the power cable to the port labled power on the ATG LMU gateway.
- Page 5 ATG Inventory Manager Gateway POWER STATUS POWER INPUT PORT AUX 2 PORT (ATG) COMM STATUS GPS STATUS AUX STATUS RED: -OFF Gateway does not have power, blown internal fuse or no power at plug (PWR) -SOLID Gateway power OK ORANGE: -OFF Gateway’s cellular modem is OFF (COM)
- Page 6 ATG Inventory Manager Gateway Communication Adapter Setups Tank monitor end varies by type as follows: Standard COMM Port Settings: • Baud Rate: 9600 • Data Bits: 8 • Stop Bits: 1 • Parity: NONE • RS-232 Security: Disabled To change COMM Port settings please refer to your Tank Monitor Operators Manual PedigreeTechnologies.com | Support: (701)-499-0022...
-
Page 7: Final Step
ATG Inventory Manager Testing / Confirmation Steps FINAL STEP Call Pedigree Technologies installation support to confirm and finalize the installation. 701-499-0022 You will be prompted for the following information during the set up process • Gateway ID • Store Name (ex. Main St. C Store) •...