Table of Contents
Advertisement
2. SPECIFICATION
2.1 INTERFACE INTRODUCTION
2.1.1 INDICATOR AND INTERFACE
ITEM
Name
Power
Status
xDSL
Indicator
Link/Act
Ethernet
Link/Act
USB
Link/Act
Line
Ethernet
USB
Interface
Power
Reset
Button
Power
Button
Table 2.1
State introduction
A steady green light means the power connection
works properly.
Blinking green indicates normal operation. A system
failure is indicated by either green or an unlit LED.
Solid green indicates a good ADSL link. Blinking
green indicates an active connection.
Solid green indicates a good Ethernet link. Blinking
green indicates an active connection.
Solid green indicates a good USB link. Blinking
green indicates an active connection.
Connected with phone line or "ADSL" port of the
splitter.
To be connected to a PC network card by a straight-
through network cable, also can use a crossover
cable to connect to Hub, Switch or Router.
To connect to a USB device through a Type B
connector.
Power interface, Connect with power adapter.
Reset to default setting.
Press the button for 5 seconds. Then you can reset
the Router with the default value.
To turn the power off and on.
Chapter 2. Specification
3
Advertisement
Table of Contents
