Setup Wizard - For Static Ip Address Connections - UTStarcom UT-300R2U User Manual

Hide thumbs Also See for UT-300R2U:
Table of Contents

Advertisement

3.2.5 SETUP WIZARD – FOR STATIC IP ADDRESS CONNECTIONS:
1.
If you are instructed to change the VPI or VCI number, type in the correct setting in the available entry fields.
Most users will not need to change these settings. The Internet connection cannot function if these values are
incorrect.
2.
Change the WAN IP Address, WAN Subnet Mask, and WAN Gateway Address as instructed by your ISP.
3.
Enter a Primary DNS Server address. Adding a Secondary DNS Server address is optional. Please see your
ISP for further instructions.
4.
Select the specific Connection Type from the drop-down menu. The available Static IP Address connection
and encapsulation types are 1483 Routed VC-Mux, 1483 Routed LLC-Mux, IPoA VC-Mux, IPoA LLC, and IPoA
LLC(1577).
Click Next to go to the next window and complete the Setup Wizard.
Setup Wizard – Set Static IP Address window
Chapter 3. Configuration
15

Advertisement

Table of Contents
loading

Table of Contents