Table of Contents
Advertisement
3.3 WAN CONFIGURATION
To configure the Router's basic Internet and LAN configuration settings without running the Setup Wizard, click
on the link for the WAN directory on the left-hand side of the main window.
This window is also used to configure the Router for multiple virtual connections (Multiple PVCs). Please see
the section entitled Multiple PVCs later in this manual for further information.
Use the Virtual Circuit drop-down menu to display up to eight configurable profiles for the Internet interface. If
you do not intend to use more than a single virtual connection (most users), you can use the default setting (PVC-0). If
you are using multiple connections, use the Virtual Circuit drop-down menu to access the WAN window for each
desired connection. To change the settings for any profile in the list, use the Virtual Circuit drop-down menu to display
individual profiles.
Opening WAN window
Chapter 3. Configuration
20
Advertisement
Table of Contents
