Table of Contents
Advertisement
iJoy-2400 Troubleshooting Guide
To check the fuse:
1. Turn the power switch to OFF and unplug the chair from the wall
outlet.
2. Using a small screwdriver or a coin, turn the fuse holder (located on
the power panel) approximately 1/8 turn counter-clockwise.
The fuse holder pops slightly out.
3. If the fuse is blown (looks black), replace it with a new fuse of the
same value.
4. Reinsert the fuse holder into the power panel, then turn it 1/8 turn
clockwise to secure it.
5. Plug the chair back into the wall outlet and turn it on.
6. Verify that the chair is now receiving power.
Step 4: If the chair is still not receiving power, replace the
PCB box
3
Advertisement
Table of Contents
Need help?
Do you have a question about the Robotic Massage iJoy2400 and is the answer not in the manual?