Mitsubishi Electric XL6500LU User Manual page 24

Menu operation (continued)
2. INSTALLATION menu
opt.
INSTALLATION
LAMP MODE STANDARD
AUTO POWER
ON
AUTO POWER
OFF
IMAGE
SETUP
CAPTURE
SPLASH
ON
SCREEN
BACK COLOR
MUTE MODE
IMAGE
REVERSE
LENS LOCK
ITEM
LAMP MODE
AUTO POWER ON
AUTO POWER OFF
IMAGE CAPTURE
SPLASH SCREEN
BACK COLOR
MUTE MODE
IMAGE REVERSE
LENS LOCK
• Regardless of the setting of LAMP MODE in the INSTALLATION menu, the STANDARD lamp mode is activated by default
whenever the projector is turned on. When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to
LOW about 1 minute after turn-on.
• You can't set IMAGE CAPTURE and SPLASH SCREEN when PASSWORD FUNCTION in the FEATURE menu has been set to
SPLASH ID SCREEN to enable the password lock.
• When you continue projection for a long time with BACK COLOR or MUTE MODE set to IMAGE, an afterimage may persist on
the screen. (See page 43.)
OFF
OFF
ON
BLUE
BLACK
OFF
OK
SETTING
STANDARD
LOW
ON / OFF
OFF / 5-60min
ON / OFF
BLUE / BLACK / IMAGE
BLACK / IMAGE
OFF
MIRROR
INVERT
MIRROR INVERT
ZOOM/FOCUS LOCK
LENS SHIFT LOCK
LENS SHIFT RESET
FUNCTION
Select this option when you want to view images in a well-lit room.
Select to moderate the intensity of the lamp. The operating sound is
reduced and the lamp lifetime becomes longer.
• When the lamp mode is switched, the projected image may fl icker.
• Frequent switching of the lamp mode may damage the lamp.
When ON is chosen, the lamp is automatically lit when the power cord is
plugged in the wall outlet. Choose ON when using the projector mounted
on the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the
remote control to turn on the lamp.
Use to set the time elapsed before the projector enters the stand-by
mode when there is no signal input from the source.
Use to capture the screen for the splash screen. (See page 32.)
Choose ON to display the splash screen when the power is turned on.
• The splash screen can be changed. (See page 32.)
Use to select the background from among BLUE, BLACK and IMAGE,
which will be displayed when there is no signal input from the source.
When IMAGE is selected, the splash screen will be displayed.
Use to choose the background, either BLACK, or IMAGE, which will be
displayed when the AV MUTE button is pressed. When IMAGE is chosen,
the splash screen will be displayed.
Select when viewing images from the front with the projector installed on
the fl oor.
Select when viewing images projected from the behind of the screen with
the projector installed on the fl oor.
Select when viewing images projected from the behind of the screen with
the projector installed on the ceiling.
Select when viewing images from the front with the projector installed on
the ceiling.
Use to enable or cancel the FOCUS LOCK and ZOOM LOCK.
Use to enable or cancel the LENS SHIFT LOCK.
Use to reset the position of the lens to the factory setting.
EN-24