Mitsubishi XD80U User Manual page 36

Menu Operation Method
Performing Menu Operations
• Only "Setup", "Options" and "Info." can be selected when no signal is being input.
• The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.
• The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected
from the power outlet.
(Note that some items are not stored.)
Preparation Switch on the power of the connected equipment, start the play operation or another operation, and input
the signal to the projector.
Select the input that you wish to adjust.
The menu display of the description diagram depicts an example in which the "Keystone" item name is selected.
Menu Display
1
Press the MENU button to display the menu
STANDBY
RGB
VIDEO CANCEL
FREEZE
1
VOL
The menu name that existed when the menu was closed previously will be displayed.
Selection of the Menu Name
2
Press the SELECT (
STANDBY
RGB
VIDEO CANCEL
FREEZE MUTE LAMP MODE AUTO
1
VOL
Each press of the SELECT
"Option" → "Info." → "Image". Each press of the SELECT
The cursor moves to the selected menu name.
Note:
Please check that the cursor of the item name has disappeared at the time of menu name selection.
Press the CANCEL button to make the cursor disappear.
MENU
ENTER
QUICK
Q
MUTE LAMP MODE AUTO
2 3 4
ASPECT
KSTN ZOOM
TIMER
) button to select the menu name
MENU
ENTER
QUICK
Q
2 3 4
ASPECT
KSTN ZOOM
TIMER
button advances the selection one step in the sequence of "Color" → "View" → "Setup" →
button causes a return of one step.
E-35