Table of Contents
Advertisement
Opening the device.
To separate the front cover from the rear, there are three small straight slots located on the bottom of the
device, using a flat bladed screwdriver, insert scredriver blade into each slot and gently twist the
o
screwdriver 30
left or right.
To replace the front cover, hook the front cover to the base cover via lugs on the top, gently push the front
cover downwards and push the bottom edge to the "wall", a gently click will be heard.
Connections (Rear)
Power supply is 12V DC, which is obtained via the A&B connections located in the indoor unit.
USB, Front bottom center, micro USB
The Micro USB connection is used for
configuration via a PC and for
firmware updates.
Configuration of wallparers, logos etc is
handled by the Pyrus configuration software,
which can be downloaded from:
https://www.toshiba-aircon.co.uk/product/rbc-mtsc1/
Cool Designs Ltd makes every effort to ensure that the information provided within this publication is correct and error free, however we cannot guarantee that it is free of inaccuracies, errors, or
omissions. Users should seek to clarify this information for themselves prior to basing any decisions upon such information.
Advertisement
Table of Contents
