General Problems - Miele G4203SCU Operating Instructions Manual

Problem solving guide

General problems

Problem
The indicator lights and
display are dark.
Detergent residue is left
in the dispenser at the
end of a programme.
The detergent
dispenser lid cannot be
closed properly.
At the end of a
programme there is a
film of moisture on the
inside of the door and
the interior walls.
Water remains in the
wash cabinet at the end
of a programme.
76
Possible cause and remedy
The dishwasher has switched off automatically to
save energy.
 Switch the dishwasher on again with the 
button.
The dispenser was still damp when detergent was
added.
 Make sure the dispenser is dry before adding
detergent.
Clogged detergent residue is blocking the catch.
 Clean the detergent from the catch.
This is caused by the drying system and does not
indicate a fault. The moisture will dissipate after a
while.
Before rectifying the problem you must:
 Switch the dishwasher off with the  button.
The filter combination in the wash cabinet is clogged.
 Clean the filter combination (see "Cleaning and
care - Cleaning the filters").
The drain pump or non-return valve may be blocked.
 Clean the drain pump or the non-return valve (see
"Maintenance").
The drain hose is kinked.
 Remove any kink from the drain hose.