Avision FF-2002H User Manual page 25

Target URL
Port #
Passive Mode
Login Name
Password
File Name
Output Color
Document Side
File Format
Resolution
*: Factory default
If FTPS, FTP, FTPES, SMB, or SharePoint is selected,
enter the URL address. You can either enter a domain
name or an IP address with the directory path. For
example, 10.1.20.25/test
Enter the port number for the [Scan to] server.
Set your FTP connection mode. Choice: On/Off
(default: Off).
Enter your login name to use the designated folder.
Enter your password to use the designated folder.
Enter your default file name.
Choose your desired default output color for the
scanned image.
Choice: *Color, Gray, B/W
Choose your desired default scanning side.
Choice: *1-Sided Face Down, 1-Sided Face Up,
2-Sided
Choose your desired default file format for the
scanned image.
Choice: JPEG, TIFF (One-Page TIFF), M-TIFF
(Multi-Page TIFF), PDF (One-Page PDF),
*M-PDF (Multi-Page PDF), PDF/A(M-PDF), PNG
The resolution is measured in pixels per inch (ppi)
(sometimes referred to as dots per inch or dpi).
Higher resolutions result in more detail in the scan,
slower scanning and in general, greater file sizes.
When OCR (Optical Character Recognition) is to be
performed on a scan, 300dpi should be used for most
languages except Asian languages. For Asian
languages, 400 dpi is recommended.
Resolution: 150 dpi
Note: If you are scanning duplex (two-sided) paper
in color mode, the max. resolution is 400 dpi.
Choice: 100 dpi, 150 dpi, *200 dpi, 300 dpi, 400
dpi, 600 dpi.
20
Resolution: 200 dpi