Advanced features (continued)
To cancel the password function:
1.
Display the FEATURE menu.
2.
Press the
or
button to select PASSWORD FUNCTION.
3.
Press the ENTER button.
•
The screen for canceling the password function appears.
opt.
FEATURE
MENU ACCESS
LOCK
OK
UNLOCK
OK
4.
Press the ENTER button.
•
The screen for entering the password appears.
PASSWORD
1
4
2
O K : ENTER
CANCEL : MENU
3
5.
Enter a 4 - 8 digit password using the
the remote control as shown below.
( =1,
=2,
=3,
=4)
6.
Press the ENTER button.
•
If you enter a wrong password, an error message appears.
•
To cancel the procedure, press the MENU button.
Important:
•
When the screen for entering the password is displayed, to disable
the password function, hold down the SOURCE and POWER but-
tons on the control panel together for about three seconds.
Magnify
By pressing the MAGNIFY button on the remote control, you can mag-
nify the image to view the details.
•
The MAGNIFY mode doesn't function with some input signals. For
details, see page 41.
•
The MAGNIFY mode doesn't work with video or S-video signal.
MAGNIFY
Magnified image
To use the MAGNIFY mode:
1.
Press the MAGNIFY button.
•
You can select the area to be magnified by pressing the
,
or
button on the remote control.
•
You can change the magnification of the selected area by
pressing the VOLUME
2.
Press the MAGNIFY button again to exit the MAGNIFY mode.
•
The regular operation screen will appear.
Important:
•
In the MAGNIFY mode, you can't adjust the volume.
,
,
or
buttons on
or
button.
,
EN-31