Advertisement
Quick Links
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items on items can discolor wood.
Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft line free cotton cloth dampened with water or furniture polish.
On highly used surfaces we recommend applying a quality paste wax, which should be used on a regular basis to
provide additional protection from scratches and spills.
How often you apply the wax depends on how much wear the furniture receives.
NOTICE
Please make sure that you have all parts indicated before you begin assembly of this item
This item should be assembled on a soft surface to prevent scratching the finish during assembly.
This item may require periodic tightening.
Part List and Hardware List
PIECE
DESCRIPTION
CABINET
A
B
LEG
C
SHELF
8mm x 16mm
HW1
8mm x 15mm
HW2
ALLEN BOLT
HW3
6X0.5X20MM
ALLEN KEY
HW4
4mm
HW5
SHELF PIN
QUANTITY
PICTURE
1X
2X
2X
8X
8X
8X
1X
8X
Model #SFV5534A
Product dimensions: 68"Wx18"Dx30"H
Weight capacity: 200 LBS
WARNING: DO NOT STAND ON SIDE BOARD
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
Advertisement
Related Manuals for SAFAVIEH COUTURE SFV5534A
Summary of Contents for SAFAVIEH COUTURE SFV5534A
- Page 1 On highly used surfaces we recommend applying a quality paste wax, which should be used on a regular basis to provide additional protection from scratches and spills. How often you apply the wax depends on how much wear the furniture receives. Model #SFV5534A NOTICE Product dimensions: 68”Wx18”Dx30”H ...
- Page 2 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 15 minutes. STEP 1: Lay the cabinet A as shown in figure, place leg B then insert washer HW1, split lock washer HW2, Allen bolt HW3 and tighten with the help of Allen key HW4 HW4 HW3...