Advertisement
Quick Links
CARE AND MAINTENANCE
Always use felt pads under all articles to prevent discoloration or softening of the lacquer.
Plastic and rubber bases on items on items can discolor wood.
Wipe up spills immediately and avoid common hazards such as hot dishes, harsh solvents and abrasives.
Cleaning should be done with a soft line free cotton cloth dampened with water or furniture polish.
On highly used surfaces we recommend applying a quality paste wax, which should be used on a regular basis to provide
additional protection from scratches and spills.
How often you apply the wax depends on how much wear the furniture receives.
NOTICE
Please make sure that you have all parts indicated before you begin assembly of this item
∗
This item should be assembled on a soft surface to prevent scratching the finish during assembly.
∗
This item may require periodic tightening.
∗
Part List and Hardware List
PIECE
DESCRIPTION
A
CABINET
LEG
B
C
SHELF
HW1
8mm x 16mm
HW2
8mm x 15mm
ALLEN BOLT
HW3
6X0.5X20MM
HW4
ALLEN KEY
HW5
SHELF PIN
QUANTITY
PICTURE
1X
2X
2X
8X
8X
8X
1X
8X
Model #SFV5535A
Product dimensions: 68"Wx18"Dx30"H
Weight capacity: 200 LBS
WARNING: DO NOT STAND ON SIDE BOARD
WARNING: DO NOT OVER TORQUE BOLTS/SCREWS
Advertisement
Related Manuals for SAFAVIEH COUTURE SFV5535A
Summary of Contents for SAFAVIEH COUTURE SFV5535A
- Page 1 Cleaning should be done with a soft line free cotton cloth dampened with water or furniture polish. Model #SFV5535A On highly used surfaces we recommend applying a quality paste wax, which should be used on a regular basis to provide Product dimensions: 68”Wx18”Dx30”H...
- Page 2 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 15 minutes. STEP 1: Lay the cabinet A as shown in figure, place leg B in the cabinet A then insert washer HW1, lock washer HW2, Allen bolt HW3 and tighten with the help of Allen key HW4...