Advertisement
BEFORE INSTALLATION
If you are installing this product in a new construction or remodel, please
make sure you are following all local plumbing and building codes. Carefully
unpack and examine your new fixture for damage. To help insure that the
installation process will proceed smoothly and correctly, please read these
instructions carefully before you begin.
PREPARATION
1. Cut out the provided template along the inside of the cutting line.
2. Position the template on the countertop and secure with adhesive tape.
Except LT163, mark the desired faucet location, making sure the chosen
faucet has adequate clearance and reach.
INSTALLATION
1. Cut out the opening on the counter
top by following the cut line on the
template.
2. Temporarily set the lavatory on the
counter top to check for fit.
3. Install the faucet and drain fittings
(not included) per the
manufacturer's instructions.
4. LT161 & LT162: Apply 2 beads of adhesive caulk (not provided) on
the bottom surface of the lavatory. Apply the first bead approx. 1/4"
from the outside edge. Apply the second bead about 5/8" from the first
bead.
LT163, LT185, LT480(G), LT994(G) & LT995(G): Apply a bead of
adhesive caulk on the bottom surface of the lavatory.
See illustration:
LT161 & LT162
LT163
Adhesive
Caulk
2
Template
Adhesive
Caulk
Advertisement
