Table of Contents
Advertisement
Setup
Connect the antennas
1) Place the antenna evenly over the antenna terminal located
at the upper left or right corner of the rear panel.
2) Turn the antenna clockwise until it is fully connected.
Do not over tighten.
3) Rotate the antenna upwards for the best possible
reception.
1)
• The antennas are required for both Bluetooth and Wi-Fi functions.
5
2)
3)
Optional
If you are connecting the AV 10 to a wired network, connect an
Ethernet cable (not included) between the AV 10 and your router.
Do not connect the Ethernet cable if you are connecting the AV 10
to a wireless network.
Router
LAN port
Advertisement
Table of Contents
