Specifications - Mitsubishi WD620U User Manual

Specifications

Type
Model
Rated power supply
Power consumption
Display Technology
Colors
Projection lens
Light source lamp
Picture size
PC compatibility
Video compatibility
Speaker
S-video input
Video input
Audio input
Analog RGB input
HDMI input
Control connector
Outside dimensions
Weight
Length of power cord
Temperature, humidity
(performance guaranteed)
• The specifications and outside appearance of the projector are subject to change without prior notice.
DLP™ projector
XD600U/XD600U-G/WD620U/WD620U-G
100 - 240 V AC, 50 / 60 Hz
3.9 A
During standby:
AC 100-120V: 3W (when STANDBY MODE is STANDARD)
0.4W (when STANDBY MODE is LOW)
AC 220-240V: 3W (when STANDBY MODE is STANDARD)
0.5W (when STANDBY MODE is LOW)
XD600U/XD600U-G:
0.7-inch Single chip Digital Micromirror Device (DMD)
Pixels: 1024 x 768 = 786432 pixels
WD620U/WD620U-G:
0.65-inch Single chip Digital Micromirror Device (DMD)
Pixels: 1280 x 800 = 1024000 pixels
16770000 colors
F 2.4-2.8, f = 20.6 - 30.1 mm
280 W
XD600U/XD600U-G: 40 - 300 inch (Wide) (aspect ratio 4:3)
WD620U/WD620U-G: 40 - 300 inch (Wide) (aspect ratio 16:10)
Resolution: 640x400 (Expand) - XD600U/XD600U-G: 1024x768 (Real) / WD620U/WD620U-G: 1280 x 800 (Real) -
1280x1024 (Compress)
Sync on Green available
NTSC / NTSC 4.43 / PAL (including PAL-M, N) / SECAM / PAL-60
Component Video (DVD/HDTV) (480i, 576i, 480p, 576p, 1080i, 720p)
10 W Mono, Round type ø5 cm x 1
Luminance signal: 1.0 Vp-p 75 Ω (negative sync.)
Chroma signal: 0.286 Vp-p 75 Ω (burst signal)
1.0 Vp-p 75 Ω (negative sync.)
350 mVrms, 10 kΩ or more
RGB: 0.7 Vp-p 75 Ω (negative sync.)
YP P /YC C : Y:1.0 Vp-p (negative sync.)
B R B R
HD/CS : TTL level (positive or negative)
VD : TTL level (positive or negative)
HDMI 19-pin
HDMI interface (TMDS single link) (only PCM audio is supported)
Serial terminal (RS-232C) (Mini DIN)
345 x 129 x 270 mm (width x height x depth)
Approx. 3.6 kg
114 inch (1.8 m)
° ° ° °
+41 F (+5 C) - +95 F (+35 C), 30 - 90%
P P /C C :0.7 Vp-p
B R B R
EN-41