Table of Contents
Advertisement
2.3 Front Panel
1. Wall mount - Please mount bracket on the wall with six M8 bolts. Then lift the
battery and attach to the bracket.
2. Wiring block - 2P (1P positive and 1P negative) power interface, printed by "+" and
"-", front mounted wiring method, positive and negative terminals are insulated by
thermoplastic polyester (PBT) insulating sheets.
3. Switch - BMS switch, when it is turned off, the BMS can be put to sleep and the
charge and discharge MOS transistors will be turned off at the same time; normal
operation will be restored after it is turned on.
Note: Please do not turn on the system switch when the product is not in use to
avoid self-consumption of the battery power.
Version 1:CAN2.0B/RS485
4.
CAN2.0B COMM to inverter - BMS supports the functionality of CAN
communication, baud rate of 500K. CAN communication interface adopts 8P8C
network cable interface. It can communicate with the inverter or CAN TEST through
CAN interface. When the battery pack is connected, RS485 communication is
connected to the data. The status and information of the battery pack can be
uploaded to PCS through CAN communication.
6
Advertisement
Table of Contents
