Table of Contents
Advertisement
NOTICE
Please use appropriate insulated tools for install and maintenance.
»
Please make sure all batteries are switched off when connected in parallel.
»
Please check the LED light sequence when the battery is switched on.
»
Please make sure the BMS communication cable is connected correctly between
»
the battery and inverter.
Please make sure ADDS dip switch settings are correct for single or multiple
»
batteries.
Please check the inverter alarm or SOC reading to ensure there is BMS
»
communication with inverter.
1.4 Environmental Safety
WARNING
Ensure that the equipment is installed in a dry and well-ventilated environment.
»
The battery installation must be away from direct sunlight and rain.
»
The installation position must be away from flammable materials.
»
The installation position must be away from water sources such as taps, sewer
»
pipes and sprinklers to prevent water seepage.
Do not expose the equipment to flammable or explosive gases or smoke. Do
»
not operate the equipment in such environments.
The operation and service life of the battery is dependent on the operating
»
temperature. Operate the battery at a temperature equal to or better than the
ambient temperature. The recommended operating temperature ranges from
0°C to 30°C.
4
Advertisement
Table of Contents
