Download Print this page
JB INDUSTRIES ZEPPELIN Instructions

JB INDUSTRIES ZEPPELIN Instructions

4-valve aluminum manifold

Advertisement

Quick Links

Repair Parts
9
8
3
4
5
2
2
1
Repair Parts
4-VALVE ALUMINUM ZEPPELIN
1
U1-6B
3/8" Intake
2
U1-4A
1/4" Intake
3
MR-525
Sight glass
7
4
MR-605
Piston w/seat and o-rings
5
MR-607
Stem and nut
6
MR-601
Handwheel and screw
6
7
MR-503
Handwheel screws (2)
8
MR-409
O-rings (2)
9
M2-102N
Hanging hook
See your wholesaler for a complete line of gauges.
WARNING: This product can expose you to chemicals including lead which are
known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
Limited Warranty
Manifold bar has a lifetime warranty, while the components (gauges,
®
hoses, handles, hose holders, etc.), are covered under the limited
warranty policy. Products are warrantied for a period of one year from
date of shipment by JB and limited to repair, replacement or credit,
if in our opinion are defective due to workmanship and/or materials.
Defective components should be returned to the wholesaler from which
the product was purchased for evaluation. Manifolds are designed for
use with all refrigerants except Ammonia (R717). Working pressures
are limited to gauge dial range. Use of this manifold under any other
conditions voids the warranty.
For Professional Use Only
JB manifolds are designed for use by technically trained HVAC/R
service engineers only. Due to the high pressures encountered in all
systems this manifold will be used on, plus the dangers due to the
physical and chemical nature of refrigerants and oils present in all
systems, misapplication could result in injury or death.
JB INDUSTRIES
630.851.9444
JB INDUSTRIES
sales@jbind.com
Part No. 25000-308 0518
ZEPPELIN
®
4-VALVE ALUMINUM MANIFOLD
INSTRUCTIONS

Advertisement

loading

Summary of Contents for JB INDUSTRIES ZEPPELIN

  • Page 1 Repair Parts Limited Warranty ZEPPELIN ® Manifold bar has a lifetime warranty, while the components (gauges, 4-VALVE ALUMINUM ZEPPELIN ® hoses, handles, hose holders, etc.), are covered under the limited U1-6B 3/8" Intake warranty policy. Products are warrantied for a period of one year from...
  • Page 2 Evacuation/Charging Recalibration MANIFOLD COMPRESSOR CAUTION: Always consult Each gauge is individually tested and calibrated prior to shipment. Due manufacturer service manual to its sensitivity, the gauge may need to be “zeroed in” prior to usage. EVACUATION CHARGING DISCHARGE SUCTION or instruction sheet for LOW SIDE HIGH SIDE Adjusting Gauge Recalibration to Zero PORT...