Ford Ranger 2008 Owner's Manual page 218

RANGER_F8M1-10-08I_Edition1 Page218
Friday, September 26 2008 3:7 PM
Maintenance and Care
Owner Maintenance
7. Install the new bulb in the reverse order
of removal.
Brake lights/Tail lights, Rear direction
indicator lights, Reverse lights
(Type A)
1. Make sure the ignition is switched off
and the applicable light switch is off.
2. Open the tailgate.
3. Turn the bolts anticlockwise and
remove them.
4. Pull the unit rearward to remove it.
Bolt
5. Turn the socket and bulb assembly
anticlockwise and remove it.
6. Disconnect the bulb from the socket.
Brake lights/Tail lights
8-32
Form No.F8M1-10-08I
Rear direction indicator lights
Reverse lights
Bolt
7. Install the new bulb in the reverse order
(Type B)
1. Make sure the ignition is switched off
2. Remove the screws with a Phillips
Black plate (218,1)
of removal.
and the applicable light switch is off.
screwdriver and then remove the lens.