How To Set The Menus - Mitsubishi Electric HC1100 User Manual

Menu operation (continued)

How to set the menus:

The following describes how to set AUTO POWER OFF
time as an example.
1. Press the MENU button.
• When no signal is applied, the menu would not
appear.
opt.
IMAGE
2. Press the or button to select a menu to use.
opt.
INSTALLATION
3. Press the ENTER button (or
opt.
INSTALLATION
LAMP MODE
LAMP TIME
(LOW)
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu
opt.
SVGA60
IMAGE AV MEMORY 1
GAMMA MODE AUTO
CONTRAST 0
BRIGHTNESS 0
COLOR TEMP. 9300K
COLOR 0
TINT 0
SHARPNESS 0
BrilliantColor TM 0
SCREEN SIZE 16:9
VERTICAL
0
LOCATION
1. IMAGE menu
ITEM SETTING
GAMMA MODE AUTO
SPORTS
VIDEO
CINEMA
USER1
± 30
CONTRAST
± 30
BRIGHTNESS
COLOR TEMP. 5 options
± 10
COLOR
± 10
TINT
± 5
SHARPNESS
TM
BrilliantColor 0 - 2
SCREEN SIZE 2 options
VERTICAL LOCATION ±26
TM
• BrilliantColor uses BrilliantColor
the projector displays higher resolution images while reproducing superior colors.
• By using the AV memory function, you can save up to 3 setting patterns of IMAGE menu for each input terminal. (See
page 26.)
• When the output from HDMI device is set to RGB, COLOR cannot be adjusted.
EN-24
SVGA60
AV MEMORY 1
SVGA60
AV MEMORY 1
button).
SVGA60
AV MEMORY 1
STANDARD
1000H
2. INSTALLATION menu
INSTALLATION
LAMP MODE
LAMP TIME
(LOW)
AUTO POWER
ON
AUTO POWER
OFF
SPLASH
ON
SCREEN
BACK COLOR
IMAGE
REVERSE
TRIGGER OUT
TEST PATTERN
FUNCTION
The proper gamma mode is automatically selected depending on the input
signal. Default is AUTO.
This is a bright mode suitable for watching sports images.
This is a standard mode suitable for watching video images, etc.
This is a mode for watching movies in dim lighting as in a theater.
/ USER2 Select to adjust the gamma curve. (See page 28.)
Use to adjust the contrast of the projected image. (See page 27.)
Use to adjust the brightness of the projected image. (See page 27.)
Use to adjust the color temperature. (See page 28.)
Use to adjust the color thickness of the projected image. (See page 27.)
Use to adjust the color tint of the projected image. (See page 27.)
Use to adjust the sharpness of the projected image. (See page 27.)
Use to adjust the BrilliantColor
Select according to the screen size.
Use to adjust the position (height) of the projected image.
TM
technology of Texas Instruments in USA. When you set this item to other than 0,
4. Press the
just.
AUTO POWER
ON
AUTO POWER
OFF
5. Set the selected item by pressing the
ton.
AUTO POWER
ON
AUTO POWER
OFF
To cancel the menu:
6. Press the MENU button several times.
Important:
• When the MENU button doesn't function, unplug
the power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
• After selecting the items marked with
ENTER button.
opt.
SVGA60
AV MEMORY 1
STANDARD
1000H
OFF
OFF
ON
BLUE
OFF
OFF
CROSS HATCH
TM
function .
or button to select an item to ad-
OFF
OFF
OFF
30 min
3. FEATURE menu
opt.
FEATURE
ASPECT
PASSWORD
DISPLAY INPUT
FUNCTION
MENU POSITION
CINEMA MODE
?
VIDEO SIGNAL
SET UP
SCART INPUT
A LANGUAGE
Ë
RESET ALL
or but-
, press the
SVGA60
AV MEMORY 1
AUTO
1.
AUTO
AUTO
AUTO
OFF
English
OK