Mitsubishi Electric HC1100 User Manual page 25

2. INSTALLATION menu
ITEM SETTING
LAMP MODE STANDARD
LOW
LAMP TIME (LOW) ****H
AUTO POWER ON ON / OFF
AUTO POWER OFF OFF / 5 - 60min
SPLASH SCREEN ON / OFF
BACK COLOR BLUE / BLACK
IMAGE REVERSE OFF
MIRROR
INVERT
MIRROR INVERT
TRIGGER OUT ON / OFF
TEST PATTERN CROSS HATCH
• When LAMP MODE has been set to LOW, the lamp mode changes from STANDARD to LOW about one minute after turn-on.
• When the lamp mode is switched, the projected image may fl icker. This is not a product malfunction.
• Do not change the setting of LAMP MODE frequently.
• To cancel the test pattern, press any button.
3. FEATURE menu
ITEM SETTING
ASPECT AUTO
4:3
16:9
ZOOM1
ZOOM2
STRETCH
REAL
PASSWORD FUNCTION
MENU POSITION 2 options
CINEMA MODE AUTO
OFF
VIDEO SIGNAL 8 options
SET UP AUTO
OFF
3.75% / 7.5%
SCART INPUT ON / OFF
LANGUAGE 10 languages
RESET ALL OK
• When SCART INPUT is set to ON, normal computer signals aren't projected.
• Use a SCART-BNC (or SCART-Mini D-SUB 15P) cable (option) when connecting this projector with an AV device
equipped with the SCART terminal.
• Some AV devices equipped with the SCART terminal aren't compatible with this projector.
• It may take a little while to carry out RESET ALL in the FEATURE menu.
FUNCTION
Select this option when you want to view images in a well-lit room.
Select to moderate the intensity of the lamp. The fan operating sound is reduced
and the lamp lifetime becomes longer.
This item shows a lamp operating time (hour) when LAMP MODE is LOW.
• When the LAMP MODE is STANDARD, this item shows a longer lamp operat-
ing time than the actual time. (See page 31 for the interval of lamp replace-
ment. )
When ON is chosen, the lamp is automatically lit when the power cord is plugged
in the wall outlet. Choose ON when using the projector mounted on the ceiling.
• The projector is in the stand-by mode when the lamp is off. Use the remote
control to turn on the lamp.
Use to set the time elapsed before the projector enters the stand-by mode when
there is no signal input from the source.
Choose ON to display the splash screen when the power is turned on.
Use to change the color of the screen that appears when no signal is supplied.
Select when viewing images from the front with the projector installed on the
fl oor.
Select when viewing images projected from the behind of the screen with the
projector installed on the fl oor.
Select when viewing images projected from the behind of the screen with the
projector installed on the ceiling.
Select when viewing images from the front with the projector installed on the
ceiling.
Choose ON to output the trigger output signal (12 V) from the TRIGGER terminal
when the lamp illuminates.
Select to show the test cross hatch pattern.
FUNCTION
Select to change the aspect ratio automatically depending on the input signal.
Select to project images with an aspect ratio of 4:3.
Select to project images with an aspect ratio of 16:9. (Linearly stretched.)
Select to enlarge and project images of CinemaScope size.
Select to enlarge and project images of Vista size.
Select to enlarge to 16:9 and project of the images with an aspect ratio of 4:3.
(Non-linearly stretched.)
Select to project images in their original size as input. Not available when the
keystone adjustment is applied.
Use to enable or cancel the password lock. See page 30 for details.
Use to change the position of the menu.
The fi lm mode will be automatically activated when a fi lm source signal is input.
The fi lm mode will not be activated.
When AUTO is selected, the appropriate video format is automatically selected
depending on the input signal. If the image isn't displayed correctly, select the
desired video format manually.
Select AUTO for normal use. When LANGUAGE is not set to
480p or TV60 signal is input, the SET UP changes to 7.5% automatically.
Select to make black lighter.
Select to make black intense.
• When 7.5% is chosen, the brightness is decreased by the set-up cancel
function for the U.S. Choose OFF when the image is dark.
Choose ON when connecting the projector with a device equipped with the
SCART terminal that can output RGB signal. SCART terminal is used mainly
in Europe. Choose OFF normally. (Available only for the input signal from the
COMPUTER IN/COMPONENT VIDEO IN terminal.)
Use to select the language used in the menus.
Use to reset the settings of the menu (excluding PASSWORD FUNCTION and
LANGUAGE) to the factory setting values.
and 480i,
EN-25