Dmx 512 Connection - Evolite IP-BOX 6X15W User Manual

 LED: 6 LED 15W RGBWA 5in1
 Power consumption: 80W
 DMX channels: 10 / 5 / 3 DMX channels
 Control protocol: DMX512, WDMX
 Color of the case: black
 Fanless
 Color temperature: 3000K~7600K
 Rugged, water-resistant housing
 XLR connectors: 3-pin Seetronic connectors
 Powercon True1 current input
 Protection index: IP65
 Operating modes: Auto, DMX, Master/Slave, WDMX, IR remote control
 Power Input: 100~240V, 50/60Hz
 Battery: Lithium-Ion 11.1V / 8800 mAH
 Autonomy: from 4 to 20h (mono-color)
 Charging time: 3 to 4 hours
 Dimensions: 200 x 160 x 235mm

Net weight: 4.2 kg
 Installation
o Rigging
The installation of the projector has to be built and constructed in a way that it can hold 10 times the
weight for 1 hour without any harming deformation.
IMPORTANT! OVERHEAD RIGGING REQUIRES EXTENSIVE EXPERIENCE, including calculating working
load limits, installation material being used, and periodic safety inspection of all installation material
and the projector. If you lack these qualifications, do not attempt the installation yourself, but instead
use a professional structural rigger. Improper installation can result in bodily injury and or damage to
property. The projector had to be installed out of the reach of people
Always secure your fixture with a safety cable!
 DMX 512 Connection
The wires must not come into contact with each other, otherwise the fixture will not work at all or
properly. Please note the starting address depends upon which controller is being used. Only use a
DMX cable and 3-pin XLR-plugs and connectors in order to connect the controller with the fixture or
one fixture to another
IP-BOX 6X15W Manual Ver. 1.00
13
Page