Table of Contents
Advertisement
Mounting
16
5.2.1
Example of mounting with angle bracket (supplied by
customer)
3
L-angle bracket; engineering unit: mm (in)
5.3
Weight
• Weight without water cooling jacket: max. 18 kg (39.69 lb)
• Weight with water cooling jacket (empty): max. 21 kg (46.31 lb)
• Weight with water cooling jacket (full): max. 25 kg (55.13 lb)
5.4
Installation requirements
5.4.1
Safety instructions
WARNING
L
Even when the source container is closed, it is possible that the Modulator FHG65 is
in the controlled area for ionizing radiation.
‣
In this case, the Modulator FHG65 must be cordoned off and made inaccessible.
For this reason, observe the following sequence of steps when mounting the modulator
and source container:
1. Mount the Gamma Modulator FHG65 on the tank or pipe
2. Establish the electrical connection of the Gamma Modulator
3. If a water cooling jacket is provided:
Connect the water supply
4. Mount the source container on the modulator and cordon it off
Gamma Modulator FHG65 Synchronizer FHG66
19.1 (0.75)
176 (6.93)
≥80 (3.15)
A0018531
Endress+Hauser
Advertisement
Table of Contents
