Beko BFLB904ADW User Manual page 35

1. If you are adding a device for the first
time, touch "Appliances" tab on the
HomeWhiz Application. Select "ADD AP-
PLIANCE" (touch here for setting up a
new appliance) button in the upper right
corner. Perform the setup by following
both the steps below and the steps in
the HomeWhiz Application.
2. To start the setup, make sure that your
machine is turned off. Press and hold
the On/Off button and the Remote Con-
trol Function button simultaneously for
3 seconds to switch your machine to
HomeWhiz setup mode.
3. When the appliance is in HomeWhiz
setup mode, you will see an animation
on the display and the bluetooth icon
will flash until your machine gets paired
with smart device. Only programme
knob will be active in this mode. Other
buttons will be inactive.
4. Follow the instructions on the display of
HomeWhiz application.
5. Wait until the installation is complete.
When setup is complete, give your
washing machine a name. Now, you can
tap and see the product you have added
in the HomeWhiz Application.
Your washing machine will auto-
matically turn off if you cannot real-
ize the setup successfully within 5
minutes. In this case, you have to
start the setup process all over
again. If the problem continues,
please contact the Authorised Ser-
vice.
You can use your washing machine
with more than one smart device.
To do this, download the Home-
Whiz app on the other smart device
as well. When you launch the app,
you will need to log in with the ac-
count you previously created and
paired with your washing machine.
Otherwise, please read "Setting up
a washing machine that is connec-
ted to someone else's account".
You need internet connection on
your smart device to proceed with
HomeWhiz setup. Otherwise, the
HomeWhiz application will not let
you finish the setup procedure suc-
cessfully. Please contact your inter-
net service provider if you are hav-
ing problems with your internet
connection
EN / 35