Operation Of The Product; Keys; Preparing The Machine; Program Selection - Beko DFN16X21W User Manual

Operation of the product

6-
Read "Safety Instructions" section first!
Read "Quick Quide" before this
section.

Keys

On / Off key
Used to turn the machine on or off.
When this key is brought to ON, the
machine is started with the economy
program and the number of the economy
program is displayed on the program
indicator. The indicators on the screen go
off.
Start / Hold / Cancel key
Used for starting, holding or cancelling the
selected program.
Program Selection key
Used to select the proper washing program
that you specified from the program
information and average consumption
table.
Delay key
Used for setting the delaying period.

Preparing the machine

1. Open the door of the dishwasher.
2. Load your dishes as described in the
user manual.
3. Ensure that lower and upper propellers
are rotating freely.
4. Add adequate amount of detergent in
the detergent compartment.
5. Inspect whether low salt and low rinse
aid indicators are illuminated; and add
salt and/or rinse aid if required.
6. Close the door of the dishwasher.

Program Selection

1. Turn your machine on by pressing the
On / Off key.
2. Select the proper washing program for
your dishes considering the program
information and average consumption
values table.
3. Press the Program Selection key until
the number of the program you have
decided is displayed on the Program
indicator

Auxiliary functions

Washing programmes of your dishwasher
are designed to obtain the best cleaning
effect, considering the type of the soiling,
soiling degree and properties of the dishes
to be washed.
Auxiliary functions are provided in order to
enable you to save time, water and energy
and to perform a more comfortable washing
with conditions specific to you.
Auxiliary functions may cause changes
in the programme duration.
Some auxiliary functions cannot be
used together.
Auxiliary functions are not suitable
for all washing programmes. Indicator
of the auxiliary function that is not
compatible with the programme will not
be active.
To add auxiliary function to the
programme:
1. Select the desired washing programme
by pressing the programme selection
key.
2. In the selected washing programme, if
auxiliary function is selected, its symbol
will be displayed on the screen. If the
function key is pressed again, the
symbol will disappear and selection is
cancelled.
33/EN